Select Advanced Setup
to change values for advanced hardware features such as
cache control and ROM shadowing.
A warning message appears when you select this choice, to
alert you that the system may malfunction if these options
are configured incorrectly. Follow the instructions on the screen
Select Advanced Setup, then use the Left Arrow (<)
and Right Arrow (>) keys to advance through each data field.
When you restart the server after adding or replacing an cache,
you must enable the cache.
Use the following procedure:
- Start the Configuration/Setup utility program.
- Select Advanced Setup.
- Select Cache Control.
- Select Cache State.
- Press the Left Arrow (<) or Right Arrow (>) key
to change the cache state to Enabled.
The Advanced Setup choice appears only on
the full Configuration/Setup menu.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.