Configuring Devices and I/O Ports



Configuring Devices and I/O Ports

You can view or change the assignments for devices and ports. Some programs and devices require specific assignments. Review the documentation that comes with the device for more information.

To view or change the assignments for devices, video, or serial or parallel ports:
  1.  Power-on the system.  When the F1 prompt appears,  press F1.  The Configuration/Setup Utility menu appears.
  2.  Select Devices and I/O Ports.
  3.  Use the Up Arrow (  ) key or the Down Arrow (  ) key  to highlight the assignment that you want to change.  Use the Left Arrow (<) and Right Arrow (>) keys  to scroll  through the list of available choices and make a selection.  If the assignment conflicts with another assignment, an  asterisk appears next to the conflicting setting. You must change  one of the conflicting settings to a value that does not conflict.
  4.  When you complete all changes to the menu,  press Esc to  return to the Configuration/Setup menu.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.