Numeric Error Codes (Type 8640)
Numeric Error Codes (Type 8640)
| Error Code/Symptom | FRU/Action |
|---|---|
| 101, 102 | 1. System Board |
| (System and microprocessor error) | |
| 0103 | 1. System Board |
| (System Timer error) | |
| 106 | 1. System Board |
| (System and microprocessor error) | |
| 0110 | 1. Memory SIMM |
| (Parity Check 1 XXXX, run Setup) | 2. System Board |
| 111 | 1. Memory SIMM |
| (I/O channel check error) | 2. System Board |
| 114 | 1. Run Diagnostics |
| (Adapter read-only memory error) | 2. Failing Adapter |
| 0115 | 1. Memory SIMM |
| (Parity Check 1 XXXX, run Setup) | 2. System Board |
| 0120 | 1. Run Setup |
| (Previous boot incomplete, | 2. Battery/CMOS Chip |
| default configuration used) | 3. System Board |
| 0130 | 1. Battery/CMOS Chip |
| (Invalid NVRAM media type) | 2. System Board |
| 151 | 1. Run Diagnostics |
| (Real time clock error) | 2. System Board |
| 161 | 1. Battery |
| (Real time clock battery error) | |
| 0162 (Models EXX) | 1. Battery/CMOS Chip |
| (Configuration error | 2. System Board |
| for slot XX, run Setup, | |
| then, run the EISA | |
| Configuration Utility) | |
| 162 | 1. Run Configuration/Setup |
| (Configuration error) | |
| 0163 | 1. Battery/CMOS Chip |
| (Real-Time Clock error) | 2. System Board |
| 164 | 1. Run Configuration |
| (Memory configuration changed) | |
| 165 | 1. Run Configuration, |
| (Micro Channel adapter | insert Reference diskette |
| configuration changed) | |
| 0171 | 1. Battery/CMOS Chip |
| (System battery is dead) | 2. System Board |
| 0173 | 1. Run Setup |
| (System CMOS checksum bad) | 2. Battery/CMOS Chip |
| 3. System Board | |
| 0174 | 1. Run Setup |
| (Invalid ISA Configuration) | 2. Look for configuration conflicts. |
| 3. Battery/CMOS Chip | |
| 0175 | 1. Run Setup |
| (EISA Configuration Error, | 2. Run EISA Configuration Utility |
| run the configuration utility) | 3. Battery/CMOS Chip |
| 4. System Board | |
| 176 | 1. Run Configuration/Setup |
| (Computer cover or cable | |
| cover was removed without | |
| a key being used) | |
| 177, 178 | 1. Run Diagnostics |
| (Hardware error) | 2. System Board |
| 184 | 1. Run Configuration/Setup |
| (Power-on password corrupted) | |
| 185 | 1. Run Configuration/Setup |
| (Drive startup sequence | |
| information corrupted) | |
| 186 | 1. Run Configuration/Setup |
| (System board or | |
| security hardware error) | |
| 189 | 1. Run Configuration, |
| (An attempt was made to | enter the administrator password |
| access the computer with | |
| an invalid password) | |
| 201 | 1. Memory SIMM |
| (Memory test error) | 2. System Board |
| 0214 | 1. Memory SIMM |
| (System RAM failed | |
| at offset XXXX) | 2. System Board |
| 0215 | 1. Memory SIMM |
| (Failing Bits XXXX) | 2. System Board |
| 0216 | 1. Memory SIMM |
| (Extended RAM failed | 2. System Board |
| at offset XXXX) | |
| 0221 | 1. Memory SIMM |
| (Shadow RAM failed | 2. System Board |
| at offset) | |
| 0254 | 1. System Board Cache |
| (System board Cache | 2. System Board |
| error, Cache disabled) | |
| 229 | 1. Cache memory |
| (Cache memory test error. | 2. System Board |
| Be sure the cache memory | |
| is enabled.) | |
| 0301 | 1. Keyboard |
| (Keyboard or keyboard | 2. System Board |
| controller error) | |
| 0302 | 1. Unlock the keyboard |
| (Keyboard locked) | 2. Keyboard |
| 3. System Board | |
| 0303 | 1. Keyboard |
| (Keyboard Error, stuck key) | 2. System Board |
| 604 | 1. Diskette Drive |
| (Diskette drive error) | 2. Drive Cable |
| 3. System Board | |
| 0610 | 1. Run Setup |
| (Incorrect drive A type) | 2. Diskette Drive |
| 3. System Board | |
| 4. Diskette Drive Cable | |
| 0612 | 1. Run Setup |
| (Incorrect drive B type) | 2. Diskette Drive |
| 3. System Board | |
| 4. Diskette Drive Cable | |
| 0632 | 1. Run Setup |
| (Diskette drive A error) | 2. Diskette Drive |
| 3. System Board | |
| 4. Diskette Drive Cable | |
| 0642 | 1. Run Setup |
| (Diskette drive B error) | 2. Diskette Drive |
| 3. System Board | |
| 4. Diskette Drive Cable | |
| 662 | 1. Run Configuration/Setup |
| (Diskette drive | |
| configuration error) | |
| 762 | 1. Run Configuration/Setup |
| (Processor configuration error) | 2. Run Diagnostics |
| 962 | 1. Disconnect external cable |
| (Parallel port error) | on parallel port. |
| 2. Internal Cable | |
| 3. System Board | |
| 1162 | 1. Disconnect external cable on serial port. |
| (System-board serial | 2. Run Configuration |
| port 1 or 2 error) | |
| 1300 | 1. Run Setup with known good diskette |
| (Operating system not found) | 2. Fixed Disk Drive |
| 3. Fixed Disk Adapter | |
| 4. Diskette Drive | |
| 5. System Board | |
| 1701 | 1. Run Setup |
| (Fixed Disk X failed) | 2. Fixed Disk Drive |
| 3. Fixed Disk Adapter | |
| 4. System Board | |
| 1702 | 1. Run Setup |
| (Fixed Disk Drive | 2. Fixed Disk Adapter |
| Controller failed) | 3. Fixed Disk Drive |
| 4. System Board | |
| 1801 | 1. Run Reference Diskette |
| (No room for PCI option ROM) | 2. Failing Adapter |
| 3. System Board | |
| 1802 | 1. Run Reference Diskette |
| (No more I/O space | 2. Failing Card |
| available for PCI adapter) | 3. System Board |
| 1803 | 1. Run Reference Diskette |
| (No more memory | 2. Failing Card |
| (above 1MB for PCI adapter)) | 3. System Board |
| 1804 | 1. Run Reference Diskette |
| (No more memory | 2. Failing Card |
| (below 1MB for PCI adapter)) | 3. System Board |
| 1805 | 1. Remove Failing PCI Card |
| (PCI option ROM checksum error) | 2. System Board |
| 1962 | 1. Run Configuration/Setup |
| (No valid boot device found, | 2. Run Diagnostics |
| be sure the drive you want | 3. Drive Cable |
| to start from is the | 4. Hard Disk Drive |
| boot sequence) | 5. System Board |
| 2401 | 1. Run Setup and enter correct monitor type |
| (Monitor type | 2. Video Display |
| does not match CMOS) | 3. Video Adapter |
| 4. System Board | |
| 2462 | 1. Display |
| (Video controller error) | 2. System Board |
| 000247100 (Type 8641) | 1. L2 processor cache was disabled, do the following |
| Boot the system diagnostics. | |
| Run the processor tests. | |
| When asked if you want to turn on the | |
| processor cache, reply, 'yes', | |
| and the error will be cleared. | |
| I9990301 | 1. Install operating system to hard disk drive. |
| (Fixed boot sector error, | |
| no operating system installed) | |
| 8601, 8603 | 1. Pointing Device |
| (Pointing Device Error) | 2. System Board |
for any BUG on this page found - Thank you.