Resolving Software Configuration Conflicts
Resolving Software Configuration Conflicts
The memory-address space and interrupt levels (IRQs) used by
some hardware options might conflict with addresses defined for use
through application programs or the
EMS. (EMS is used only with DOS.)
If there is a conflict, one or more of the following conditions
might exist:
- The system cannot load the operating system.
- The system does not work.
- An application program does not operate, or it returns an error.
- Screen messages indicate a conflict exists.
You can resolve conflicts by changing either the software or the
hardware configuration.
NOTE:
Start the EISA Configuration Diskette
to view the addresses used by the system board functions.
Use the Advanced
function of Step 3, View or edit details to view
the addresses used by the adapters.
(See 'Using EISA Configuration Diskette Advanced Function' for instructions.)
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.