Sample Applications



Sample Applications

Some optional devices provide small applications or sampler files. These applications demonstrate the capabilities of the device and serve as software examples for programming the device. Refer to the documentation supplied with the option for additional information.

To configure the server for an ISA or EISA adapter:
  1.  Read the documentation supplied with the adapter.
  2.  Copy any files with the extension of .CFG   from the option diskette  to the EISA Configuration Diskette.  See 'Files' for important information about configuring  ISA adapters.
  3.  Start the EISA Configuration Diskette (see 'Starting the EISA Configuration Diskette').
  4.  Record the new configuration information  (see 'Recording EISA Configuration Settings').
  5.  Save the new configuration settings to  the EISA Configuration Diskette and to the  nonvolatile random access memory (NVRAM) (see 'Starting the EISA Configuration Diskette').
  6.  Set any jumpers or switches on the adapter.
  7.  Install the adapter in the server.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.