Key
Description
Arrows
Move the cursor to the place in the text where you want to make
changes.
Home
Press Home once, to move the cursor to the start of the
current line.
Press Home twice, to move to the beginning of the file.
Press Home three times, to move to the beginning of the
file.
End
Press End once, to move the cursor to the end of the
current line.
Press End twice, to move the cursor to the end of the
current line.
Press End three times, to move the end of the file.
F2
Press F2 to be in search mode, You are prompted to enter
the search word or words on a reverse highlighted line at the bottom of the
File Edit Screen. After typing in the search word, press Enter.
F3
Press F3 to find the next occurrence of a search word.
F4
Press F4 to mark the start of a block of text (if
you have not previously marked it).
If you previously marked the block of text, pressing this key
unmarks the text block.
F5
Press F5 to complete the block marking (started with F4).
If you did not previously press F4 to start marking a block
of text, F5 is ignored.
F6
Press F6 while the cursor is within the active block to
move an active (marked) block of text. Move the cursor to the new
location where the active block is to be moved, then press F6
again. If there is no active block of text, F6 is ignored.
F7
To copy an active (marked) block of text to a new location,
move the cursor to the new location and then press F7.
If there is no active block of text F7 is ignored.
F8
To delete an active (marked) block of text, move the cursor within the
active block and press F8.
If there is no active block of text, F8 is ignored.
F10
Press F10, to save all changes and exit the file.
NOTE:
Diagnostics Control Keys
The following is a list of the Diagnostics Control Keys,
when used and a description of the Diagnostics response.
Control Keys
When Used
Diagnostics Response
Ctrl+A
Main Menu
Allows you to select test from the sub menus that are highlighted with
red letters.
Attention:
If selected, these test will erase the information stored on the diskette or hard disk drive.
Up and Down
Arrow KeysMain Menu
Module Test Menu
Test Group MenuHighlights an item you want to select.
Space Bar
Module Test Menu
Test Group MenuAdds a DIAMOND '' to the left of the highlighted test. The test will run
when Run All Selected is highlighted and the Enter key is pressed.
Also removes the DIAMOND '' to the left of the item. The test will not
run when Run All Selected is highlighted and the Enter key is
pressed.
Tab Key
Main Menu
Module Test MenuSelects the additional test for the menu you are in.
+/- Keys
Test Group Menu
Selects additional test. The LUN displayed on the top right Test Group
Menu shows which test is selected and how and remain (example LUN 1 of 2).
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.