1050 Main Card (3546)

1050 Main Card

Removal

NOTE: Do not forget to put back the shield upper to the main card when reassembling the unit.

Main Cabinet Group
Audio Card
Power Supply Unit
Riser Card
Remove all cables from the connectors on the main card. (Refer to 'Main Card' for the location of these connectors.)
1 2 3 4 (upside down view)
Remove the Guide AT after doing 4.
Widen the end of the main chassis where the PCMCIA slot is located 5 and pull out the main card from the main chassis 6.

Step Color/type (quantity) Length 1 Binding head screw (2) Diameter: 3 mm (0.12 in.) 8 mm (0.24 in.) 2 Pan head screw (2) Diameter: 3 mm (0.12 in.) 6 mm (0.24 in.) 3 Pan head machine screw (2) Diameter: 2 mm (0.08 in.) 20 mm (0.79 in.) 4 Pan head screw (1) Diameter: 3 mm (0.12 in.) 6 mm (0.24 in.)

Step	Color/type (quantity)	Length
1	Binding head screw (2) Diameter: 3 mm (0.12 in.)	8 mm (0.24 in.)
2	Pan head screw (2) Diameter: 3 mm (0.12 in.)	6 mm (0.24 in.)
3	Pan head machine screw (2) Diameter: 2 mm (0.08 in.)	20 mm (0.79 in.)
4	Pan head screw (1) Diameter: 3 mm (0.12 in.)	6 mm (0.24 in.)

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.