Error Log (3545)



Error Log

Diagnostic errors are printed on the printer that is attached to parallel port when the error is detected. The error is also logged in the system memory.

Use the following procedure to display the errors.
  1.  End the test, if it is running.
  2.  Press Ctrl+A to select the advanced diagnostic mode.
  3.  Press Ctrl+E.
  4.  The error log appears.
  5.  To exit the screen, select the cancel icon or press Esc.


The error log is not saved when system power is turned off.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.