Symptom | FRU/Action |
---|---|
The LCD screen is blue. | 1. Video Connector |
NOTE: Make sure all cables are | 2. AD/VC Adapter |
firmly plugged into their | 3. I/O Card |
respective connectors. | 4. Main Board |
The LCD screen gradually | 1. AD/VC adapter |
becomes white after the | 2. I/O Card |
the computer is turned on | 3. Main Board |
A white line extends | 1. AD/VC Adapter |
across the screen. | 2. I/O Card |
NOTE: Check the following: | 3. Main Board |
1. Remove the computer | |
from the Dock I and | |
verify correct operation | |
of the computer. | |
2. Reinstall the computer | |
onto the Dock I and run the | |
Automatic Configuration . | |
A particular color | 1. AD/VC Adapter |
(red, green, or blue) | 2. Video Connector |
appears considerably | 3. Main Board |
more than any other | |
two colors, even after | |
the Color Adjustment | |
is made. | |
NOTE: Make sure | |
the video connector is | |
correctly connected. | |
No motion video appears in | 1. AD/VC Adapter |
the window for motion video. | 2. I/O Card |
3. Main Board | |
4. ActionMedia II Adapter | |
NOTE: If color for | |
motion video is correct, | |
suspect that the AD/VC adapter, | |
the I/O card, or the main board | |
is defective. | |
If color is not correct, suspect | |
the ActionMedia II adapter or | |
its application program. |