Utilities (2603)



Utilities

The system is configured with several utility programs. These programs provide added function that enhance the usability of the system. It is recommended that you backup these programs to prevent loss of data. Use the INTRO program shipped with the computer to backup the utilities. The utility programs are:
SIMUL    Allows you to enable/disable simultaneous display on both
     the LCD and external monitor.
   NOTE:    The computer will not enter Suspend/Resume while in the
     Simultaneous mode. You must exit Simultaneous mode before
     Suspend/Resume is allowed.
     Also, the Func + F7 function is not recognized until you exit
     the Simultaneous mode.
EPP2    Provides Enhanced Parallel Port Utility. This utility needs to be
     added to the AUTOEXEC.BAT and CONFIG.SYS if the option attached to
     the parallel port supports the enhanced parallel port mode.
PHDISK    Prepares the hard disk drive for the hibernation feature,
     including formatting and the marking of defective areas.
     A partition is reserved on the hard disk drive to save
     data before the computer enters Hibernation mode.

 

     Running this utility causes loss of data on the hard disk drive.
     It is important that the customer backup all data prior to
     using this utility.
     Run the PHDISK utility if you change the operating environment,
     reformat the hard disk drive, or add additional memory.
PCMCIA Drivers    IBM22SS01.SYS and PCMCIA.SYS provides the ability to use
     PCMCIA cards in an OS/2 environment.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.