Power-On Password (2615)
Power-On Password
To override a password , do the following.
- Power-off the computer.
- Remove the access panel.
- Remove the battery pack.
- Remove the top assembly (do not disconnect any cables).
- Connect a jumper to the two pads (R39) at the side of
the math coprocessor socket.
- Reinstall the battery pack.
- Power-on the computer. Keep the computer on until the LEDs blink and
the system locks.
- Remove the jumper.
- Press and hold the reset switch, then power-on
the computer.
- Power-off the computer.
- Replace the top assembly and the access panel.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.