Testing the Battery Pack (8554)

Testing the Battery Pack
  1.  Remove each battery pack and measure the voltage at the  battery terminals between (+) and (-).


    Terminal Voltage (Vdc)
    (+) +12 to +18
    ( T ) Thermal Detection
    ( - ) Ground


  2.  Using a low-power ohm meter, measure the resistance at  the battery terminals between
      (T) and (-).  The resistance must be 500 ohms to 20 kilohms.

     If the resistance is out of range, replace the battery pack.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.