20/40 GB DDS-4 4mm Internal (SCSI) Tape Drive
SCSI-ID
Bit 8
#3Bit 4
#2Bit 2
#1Bit 1
#0
0
Off
Off
Off
Off
1
Off
Off
Off
On
2
Off
Off
On
Off
3
Off
Off
On
On
4
Off
On
Off
Off
5
Off
On
Off
On
6
Off
On
On
Off
7
Off
On
On
On
8
On
Off
Off
Off
9
On
Off
Off
On
10
On
Off
On
Off
11
On
Off
On
On
12
On
On
Off
Off
13
On
On
Off
On
14
On
On
On
Off
15
On
On
On
On
Term. Power Jumper
Most SCSI adapters provide termination power.
However, if the SCSI adapter does not provide termination power, you will need to
place a jumper on the Term. power jumper pins.
If the tape drive is the last device on the SCSI device chain, the chain must be terminated at the drive.
Some SCSI cables provide self-termination and do not require SCSI terminators.
If the computer cable does not provide self-termination attach a SCSI terminator (not provided) to the
drive connector before attaching the SCSI cable.
Parity Enable Jumper
To generate parity, place a jumper on the Parity enable jumper pins.
-Attention- There are additional micro switch settings on the bottom of the drive.
DO NOT ADJUST THESE SETTINGS !
