IBM Dual LANStreamer MC 32 Adapter


IBM Dual LANStreamer MC 32 Adapter.
(Installation and Testing Instructions P/N 73G7126 U.S.A) 

Dual LANStreamer MC 32 Adapter FRU Parts

73G7140 IBM Dual LANStreamer MC 32 Adapter

The adapter kit contains:

The IBM Dual LANStreamer MC 32 adapter has two ports that each support connection to a token ring network that is wired with shielded twisted pair (STP) or unshielded twisted pair (UTP) cabling. The supported data rates are 4 Mbps and 16 Mbps. You could use UTP on one port and STP on the other, likewise the data rates do not have to be the same for both ports. The Dual LANStreamer Adapter is for use with an IBM PS/2 computer or compatible computer equipped with a 386 or better processor and Micro Channel architecture.

Installation Requirements

Figure Cable or END Description
A IBM Token-Ring RJ-45 STP
Adapter cable		 IBM P/N 60G1063
A1 Connector, adapter end 8-position RJ-45 modular jack
A2 Connector, network end IBM Cabling System Data Connector
B IBM Token-Ring UTP cable Two twisted pairs of UTP cabling.
B1 Connector, adapter end 8-position RJ-45 modular jack
B2 Connector, network end 8-position RJ-45 modular jack
or 6 position RJ-11 modular jack
C IBM RJ-45 STP/D-Shell
Conversion Cable		 IBM P/N 60G1066. Supplied for use
with IBM Token-Ring Network PC
Adapter cables.
C1 Connector, adapter end 8-position RJ-45 modular plug
C2 Connector, network end 9-position D, male
D IBM Token Ring Network
PC Adapter Cable
(STP cable)		 IBM P/N 6339098
D1 Connector, adapter end 9-position D, male
D2 Connector, network end IBM Cabling System Data Connector or equivalent


Token Ring - UTP Modular Connector

for RJ-45/RJ-11 Pin-layout see > Token Ring - UTP Modular Connector

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.