AdapterID 06DACh AdapterName "Logitech ScanMan Adapter" NumBytes 4 NamedItem Prompt "Interrupt Level" choice "Int 3" pos[0]=00xxxxx1b int 3 choice "Int 4" pos[0]=01xxxxx1b int 4 choice "Int 5" pos[0]=10xxxxx1b int 5 Help "This is the Hardware Interrupt Level used by the ScanMan Adapter, it can be shared with other adapters. Use the F5=Previous and the F6=Next keys to change the Hardware Interrupt Level if you are in the 'Change configuration' window." NamedItem Prompt "DMA Channel (Arbitration Level)" choice "Level_1" pos[3]=xx110001b arb 1 choice "Level_2" pos[3]=xx110010b arb 2 choice "Level_3" pos[3]=xx110011b arb 3 Help "This is the DMA Channel used by the ScanMan Adapter. Use the F5=Previous and the F6=Next keys to change the DMA Channel if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "I/O Address Range" choice "280h to 288h" pos[2]=00000010b pos[1]=10000000b io 280h-288h choice "2A0h to 2A8h" pos[2]=00000010b pos[1]=10100000b io 2A0h-2A8h choice "330h to 338h" pos[2]=00000011b pos[1]=00110000b io 330h-338h choice "340h to 348h" pos[2]=00000011b pos[1]=01000000b io 340h-348h Help "This is the I/O Address Range used by the ScanMan Adapter. Use the F5=Previous and the F6=Next keys to change the Base Port Address if you are in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter."