Power control card removal - (NF 8500R - Type 8681)

Power control card removal


To remove the power control card:
  1.  The power control card -5- is located on the midplane -2-.
     See 'Midplane removal' for instructions and the illustration on removing the midplane.
  2.  Lift up from the orange plastic pull -3- on the bracket -4-.
     This will lift the bracket clear of the power control card.
  3.  Lift the power control card up from the midplane.
  4.  Reverse the procedure to install the power control card.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.