LED card removal - (NF 8500R - Type 8681)

LED card removal


To remove the LED card from the operator panel assembly:
  1.  Remove the two screws -1- that hold the operator panel assembly -2- to the server chassis.
  2.  Pull the operator panel out of the slot.
  3.  The LED card -4- is located on the back of the operator panel assembly.
  4.  Remove the two screws -3- which hold the LED card in place, and remove the LED card.
  5.  Reverse the procedure to install the LED card.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.