Error Logs - (NF 8500R - Type 8681)


Error logs: Select Error Logs to choose to view either the POST error log or the system error log.


POST error log: Select POST Error Log to view up to three error codes and messages that the system generated during POST.
You can clear the error log by selecting Clear error logs.


System error log: Select System Error Log to view the system error log.
The system error log contains all the system, error, and warning messages that the system has generated.
You can use the Up Arrow (  ) or Down Arrow (  ) keys to move between pages in the system error log.


Save settings: After you make configuration changes, review them to be sure that they contain the correct information.
If the information is correct, select Save Settings to save the selected changes.


Restore settings: After you make configuration changes, review them to be sure that they contain the correct information.
If the information is incorrect, or if you do not want to save these changes, select Restore Settings to delete the changes and restore the previous settings.


Load default settings: If you make configuration changes and then decide that you want to use default values instead, select Load Default Settings to cancel the changes and restore the factory settings.


Exit setup: To exit from the Configuration/Setup Utility main menu, select Exit Setup.
If you made changes and did not save them with the Save Settings choice, the system prompts you to either save the changes or exit without saving the changes.
Follow the instructions on the menu.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.