SCSI Error Codes
| Error Code | FRU/Action |
|---|---|
| All SCSI Errors | 1. External SCSI devices must be powered-on |
| One or more of the following | before you power-on the server. |
| might be causing the problem: | 2. The cables for all external SCSI devices are connected correctly. |
| 3. If you have attached an external SCSI device to the server, | |
| ° A failing SCSI device | make sure the external SCSI termination is set to automatic. |
| (adapter, drive, controller) | 4. The last device in each SCSI chain is terminated correctly. |
| ° An improper SCSI | 5. The SCSI devices are configured correctly. |
| configuration or SCSI | |
| termination jumper setting | |
| ° Duplicate SCSI IDs in the | |
| same SCSI chain | |
| ° A missing or improperly | |
| installed SCSI terminator | |
| ° A defective SCSI terminator | |
| ° An improperly installed cable | |
| ° A defective cable |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.