Removing the Server Door (tower model) - Netfinity 5600 - Type 8664

Removing the Server Door (tower model):

Refer to the following illustration while you perform the steps in this procedure.


1 Flange
2 Server door

To remove the server door:
  1.  Unlock and open the server door -2-.
  2.  Locate the flange -1- on the top edge of the door.
  3.  Press down on the flange while pressing out on the door; then lift the server door up and off the hinge.
     Set the door aside in a safe place.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.