Power Backplane/Backplate Assembly Removal - Netfinity 5600 - Type 8664


Power Backplane/Backplate Assembly Removal

Before you begin: Read 'Safety information'.

Notes:

  1.  The illustrations in this book are similar to the server; details might vary.
  2.  To replace the power backplane/backplate assembly, reverse this procedure.


To remove the power backplane/backplate assembly, do the following.

  1.  Power-off the server and all external devices; then, disconnect the server from the power source.
  2.  Remove the server cover. See 'Removing the left-side cover (tower model)' or 'Removing the cover (rack model)'.
  3.  Remove the power supplies. See 'Installing a hot-swap power supply'.
  4.  Disconnect the power backplane/backplate assembly cables.
     
  5.  Release the power backplane/backplate assembly latch -1-; then, slid the power backplane/backplate  assembly -2- out of the server.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.