Updating Device Records and Reconfiguring the Server - Netfinity 5600 - Type 8664

Updating Device Records and Reconfiguring the Server

When you start the server for the first time after you add or remove an internal option or an external SCSI device, you might see a message telling you that the configuration has changed.

Some options have device drivers that you need to install.
Refer to the documentation that comes with the option for information about installing any required device drivers.

If you have more than one microprocessor installed, you might want to upgrade the operating system.
Refer to 'ServerGuide and Netfinity Manager Information' section of this Server Library .
If you have installed or removed hard disk drives and the server has a RAID adapter installed, refer to the documentation provided with the RAID adapter for information about reconfiguring the disk arrays.

Run the Configuration/Setup Utility program to save the new configuration information.
See 'Configuring the server'.

Record the updated device and configuration information.