Making the CD-ROM Bootable


Making the CD-ROM Bootable

Prior to the installation make sure that the system is able to boot from the CD-ROM drive. That is done by following these steps:

  1.  Power on the server. When you see the IBM logo press F1 to enter the Setup Utility.
  2.  From the Setup Utility select Start Options.
  3.  From the Start Options select Startup Sequence.
  4.  Make sure that your CD-ROM drive is one of the startup devices.
  5.  Press Esc until you come to the Setup Utility main screen and press Save Settings.
  6.  Press Enter to confirm saving the current settings.
  7.  Exit the Setup Utility.


Making the CD bootable can also be done by loading the default settings from the Setup Utility, but be aware that all other settings will be set to default as well.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.