Updating Firmware

Updating Firmware

Tape Library Firmware

Three methods may be used to update tape library firmware:

Update using the serial port
Update using a DLT tape cartrige (if the library firmware is at level 1.50 or higher)
Update using the 'tapeutil tool' (for RS/6000 only)

The sections that follow describe the first two methods.
For instructions about updating your tape library firmware with the tapeuti 1 tool, see Appendix B,
'Updating the Tape Library Firmware on the RS/6000'.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.