Autoloader Mode

Autoloader Mode

•  Initialization/Setup Mode
•  On-Line Mode
•  Off-Line Mode
•  Diagnostic Off-Line Mode

Use the autoloader mode to specify a range of tapes to be autoloaded in a sequential operation (that is, without host media changer commands).
Enter the autoloader mode by selecting AUTOLOADER from the setup menu.
The tape library exits the autoloader mode when the AUTOLOADER parameter is turned off in the setup menu.
For more detailed information, see 'Setup Information' and Appendix B, 'Using Autoloader Mode', in the 3447 and 7337 Digital Linear Tape Library Setup and Operator Guide .

Note: The preceding description applies to tape library firmware at level 1.50 or higher.