SCSI Cable Lengths
The tape library comes with the SCSI cables to connect the tape library controller to the tape drives.
The SCSI cable to connect the host to the tape library controller must be supplied by the installer.
(Below) Figure 4 lists the available SCSI cables and lengths.
The following are the maximum combined cable lengths for the host-to-tape library controller SCSI cables:
The internal SCSI cable length for the controller is approximately 6 in. (15.3 cm).
The length for the internal SCSI cable for each drive is approximately 12 in. (30.5 cm).
The length for a cable to connect a tape drive to the controller is approximately 12 in. (30.5 cm).
As an example, in a configuration with two tape drives with a daisy-chain connection to the controller, the reduction in length of the
host-to-controller cable is approximately 54 in. (137.2 cm).
Figure 4. Table 5. SCSI Cables for RS/6000 and PC
Feature Code
Cables for RS/6OOOLength
Part Number
2845
2 ft (0.6 m)
52G4291
2846
8 ft (2.5 m)
52G4233
2878
14 ft(4.5m)
88G5749
2879
39 ft (12.0 m)
88G5747
2880
59 ft (18.0 m)
88G5746
Feature Code
Cables for PCLength
Part Number
Not applicable
14 ft (4.5 m)
49G6457
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.