Guidelines for the Rebuild Operation
Guidelines for the Rebuild Operation
- The replacement hard disk drive must have a capacity equal to or greater than the failed drive.
- If the hard disk drive being rebuilt is part of a RAID level-0 logical drive, the RAID level-0 drive is blocked.
- You must unblock any RAID level-0 logical drives at the end of the rebuild operation.
- If you use the Administration and Monitoring program to initiate the rebuild operation,
you can unblock the blocked RAID level-0 drive when the rebuild operation completes.
(See 'Unblocking Logical Drives' for more information.)
- Data in a logical drive with RAID level-0 is lost during the rebuild operation.
If you backed up your data before the drive failed, you can restore the data to the new drive.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.