ServeRAID POST Messages
The following numeric POST messages appear in hexadecimal format.
---------------
1xxx to 7xxx
Explanation: The POST detected an internal error.
Action: Have the system serviced.
---------------
2601 to 260B
Explanation: The POST detected an error with the ServeRAID subsystem.
Action: Have the system serviced.
---------------
2610
Explanation: The POST detected an error with the ServeRAID adapter or controller hardware.
Action: Have the system serviced.
---------------
2620
Explanation: The POST detected that a ServeRAID configuration or hard disk error occurred.
Action: Start the IBM ServeRAID Configuration CD and view the existing
device and configuration information for your ServeRAID subsystem.
If you can not locate and correct the configuration problem or the failing device, or if the
problem persists, have the system serviced.
---------------
8xxx to Bxxx
Explanation: The POST detected an error with the SCSI interface.
Action: Verify that the SCSI cables are correctly connected, and the SCSI
termination is set properly for each installed SCSI device.
If you can not locate and correct the SCSI problem, or if the problem persists, have the system serviced.
for any BUG on this page found - Thank you.