Starting the IPSMON Program

Starting the IPSMON Program

You can run the IPSMON program from the operating system command line.

To start the IPSMON program:

•  If you are using OS/2 or Windows NT:
  1.  Type:

       c:\ipsadm\ipsmon

  2.  Press Enter.

     Note: The c  represents the drive where OS/2 or Windows NT is installed.

•  If you are using Novell NetWare:
  1.  From the console, type:

       load ipsmon

  2.  Press Enter

•  If you are using SCO OpenServer or UnixWare:
  1.  Type:

       /usr/bin/ipsmon

  2.  Press Enter.