Installing the Files for OpenServer 5.0.0

Installing the Files for OpenServer 5.0.0

To install files for OpenServer 5.0.0 using an IDE CD-ROM drive:

1.  Type the following at the BOOT prompt:

     restart ahslink="ATAPI ipsraid" Srom=wd(0,0,0,0)

2.  Insert the ATAPI BTLD diskette when prompted; then, press r to replace the wd  driver.

    The fields for the ATAPI CDROM are:

     Srom=wd(c,d,l,b) where:

     c = primary (0) or secondary (1) IDE/EIDE controller
     d = master (0) or slave (1) device
     l = LUN of device (always 0 with ATAPI or wd driver)
     b = BUS of device (always 0 with ATAPI or wd driver)