Using Express Configuration

Using Express Configuration

To use the Express Configuration path:

  1.  Click on the ServeRAID controller that you want to configure in the Main Tree.
  2.  Click on the Express Configuration radio button.
  3.  Click on the Next button.
  4.  Review the information that appears on the Configuration Summary screen.


    1.  Some operating systems have size limitations for logical drives.
       Before you save the configuration, you might want to verify that the size of the logical  drive is appropriate for your operating system.
       See your operating-system documentation for more detailed information.
    2.  To change the configuration, click on a Modify icon button.

  5.  Click on the Apply button to accept and save the configuration.
  6.  If you have not already done so, install your operating system.
     See the server documentation or the documentation provided with your operating system for more information.

After you install your operating system, see Chapter 4, 'Installing Device Drivers and Utility Programs' (or see the installation instructions provided with the server) for information about installing the ServeRAID device drivers and utility programs.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.