Checking the Availability of a Drive


Checking the Availability of a Drive



Note: Make sure the ServeRAID Administration and Monitoring Utility is installed on your server.
If you need to install it, refer to the IBM ServeRAID Adapter Installation and User's Guide  for instructions.


To check the availability of a hard disk drive on another server, do the following:

  1. From the Administration and Monitoring Utility screen, click on the   icon
     on the tool bar or select High Availability from the Advanced pull-down menu and then select View Shared Devices.
  2.  Click on the box to Enable View Shared Devices.
  3.  Select the channel that the hard disk drive you want to check is connected to.

    Note: This procedure can determine only if ONL Devices are available.

  4.  Select the bay of the hard disk drive that you are checking is connected to.
     Click on Refresh Now. If the hard disk drive is available for use,  it will appear as RDY (Ready) on the Administration and Monitoring Utility screen.
     If the hard disk drive is not available for use, meaning that it is owned by the other server, it will  appear as RSV (Reserved) on the Administration and Monitoring Utility screen.

     All of the other hard disk drives owned by the other server also will appear as RSV at this time.

    Note: Hot-spare drives owned by the other server will not display as RSV.
     Care must be used to make sure that the other servers hot-spare drives are not used inadvertently by both servers.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.