Preparing the Servers


Preparing the Servers



Before you configure Server A and Server B, do the following:
  1.  If necessary, perform any operating system shutdown procedure on the two servers, Server A and  Server B, you are going to use in the cluster, and then turn off the servers.

    Note: If you are using MSCS, determine which ServeRAID logical drive will be used as the quorum  resource and the ServeRAID adapter pair that it is connected to.
     Then, connect the channel 3 connectors of that ServeRAID adapter pair together, using the appropriate cable  options, to create the SCSI heartbeat connection.  See the 'IBM Shared Disk Clustering Hardware Reference' for more information and part numbers.

  2.  If you have not done so, connect any shared external drive enclosures between both servers;  then, turn on the enclosures.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.