Optional Devices Supported on the PC Server 3518
The following table provides information about the optional devices available for the PC Server 3518
Enterprise Expansion Enclosure.
Option
Part Number
Description
Backplane
76H2670 (1)
IBM PC Server Hot-Swap Backplane III
Cable
94G4070
Backplane-to-Backplane Cable (used to daisy chain two backplanes
together to form one continuous SCSI bus)
Cable
70G9876
Backplane Cable (used to connect a backplane to a repeater card
or to the rear-panel knockout)
Cable
70G9864
Backplane-to-Media-Bay Cable (This cable is used to connect a
5.25-inch device in bays B1 or B2 to share the SCSI channel for
the hot-swap bays. A 68-to-50 pin converter (32G3925) comes with
this cable.)
Cable
70G9877
Media-Bay Cable (This cable is used to connect a 5.25-inch device
in bays B1 or B2 to the rear of the enclosure so that it can use a
dedicated SCSI channel. A 68-to-50 pin converter (32G3925)
comes with this cable.
Convenience Kit
94G7584
Shared Disk Convenience Kit.
This kit contains:
° 1 76H2670 Hot-Swap Backplane III
° 2 94G7585 SCSI-2 Fast/Wide Enhanced Repeaters
° 1 94G7593 Power Supply Upgrade II option
° 2 86H2432 IBM 100/10 PCI EtherJet Adapters
° 2 94G4070 Backplane-to-Backplane cable
° 1 70G9876 Expansion Enclosure Backplane Cable
° 1 76H0551 (2) Ethernet Crossover cable
° 2 01K8029 4.3 Meter External 68-pin SCSI Cable
Hard Disk Drive
70G9862 (3)
2.25 GB, SCSI-2 F/W, hot-swap
Hard Disk Drive
94G7491 (3)
4.5 GB, Wide Ultra SCSI 159 , hot-swap
Hard Disk Drive
94G7492 (5)
9.1 GB Wide Ultra SCSI 159 , hot-swap
Hard Disk Drive
02K0477
9.1 GB Wide Ultra SCSI 159 , hot-swap (slim line)
Hard Disk Drive
76H2689 (6)
9.1 GB Wide Ultra SCSI 159 (half high)
Power Supply
94G7593
PC Server Power Supply Upgrade II
Power Supply
94G4701
780 Watt Redundant Power Option
Repeater
94G7585 (7)
PC Server SCSI-2 Fast/Wide Enhanced Repeater
Security
70G9742
PC Server Security Cover
Tape Drive
74G8631 (8)
4/10 GB 5.25-inch DAT Tape Kit
UPS
94G3135
APC Smart-UPS 1000
UPS
94G3136
APC Smart-UPS 1400
(1) You must have a power-supply upgrade installed (either 94G7593 or 94G4701) to support multiple backplanes.
(2) This cable is not available for separate purchase. This Category 5 cable is designed for point-to-point connections and has RJ-45 connectors on each end.
(3) Each Bank supports up to six of these drives, for a maximum of 18 drives per enclosure.
(4) You must configure Ultra SCSI drives to operate at SCSI-2 speeds in this enclosure.
(5) Each Bank supports up to three of these half-high drives, for a maximum of nine drives per enclosure.
(6) You can install this drive in bay B1 or bay B2.
(7) The older model of the repeater (Part Number 94G5565) is not supported in cluster configurations.
(8) Requires a 68-pin to 50-pin converter (IBM Part Number 32G3925) and a Media-Bay Cable (IBM Part Number 70G9864 or 70G9877).
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.