Parts List for the Netfinity 7000 Rack Cluster Example

Parts List for the Netfinity 7000 Rack Cluster Example

Quantity	Part Number	Description
2	8651-RH0	Netfinity 7000 rack-ready model
6	94G7147	200 MHz Pentium® Pro Microprocessor Upgrade with 1 MB of Level-2 Cache (three for each server)
2	94G7150	Netfinity 400 Watt Hot-Swap Redundant Power Supply (one for each server)
8	94G7429	Netfinity 4.51 GB Wide Ultra SCSI SCA-2 Hot-Swap Hard Disk Drive (four for each server)
4	76H3584 (1)	IBM ServeRAID II Ultra SCSI Adapter (two for each server)
6	86H2432	IBM 100/10 PCI EtherJet Adapter (three for each server)
4	Varies (2)	Ethernet cables (to connect the servers to the public network)
1	None (3)	Ethernet Crossover Cable
4	35201RU	Netfinity EXP10 enclosures
8	03K9352	Netfinity EXP10 3.0 Meter External Auto-Sensing Cable
34	01K7959	9.10 GB Wide Ultra SCSI SCA-2
1	01K8017	The 8-mm to 68-pin Converter Option (required for the quorum-arbitration link when using Microsoft Cluster Server)
2	76H5400	Third Channel Cable Option (required to route the ServeRAID II adapter's third channel for external use, such as for the quorum-arbitration link when using Microsoft Cluster Server)
1	01K8029	4.3 Meter External 68-pin SCSI Cable (required for the quorum-arbitration link when using Microsoft Cluster Server)
1 or more	Varies (4)	Uninterruptible Power Supplies

(1) The ServeRAID II adapter firmware, BIOS code, device drivers, and utility programs must  be at version 2.40 or higher.
(2) Must be purchased separately. Part numbers vary.
(3) This cable is provided in the Netfinity Cluster Pack by Vinca. If you are not using the cluster pack, you must  purchase this Category 5 cable from an outside source. The cable must  be designed for point-to-point connections and must  have RJ-45 connectors on each end.
(4) See 'Selecting Servers and Enclosures' for information about the uninterruptible power supply options available for the servers, storage enclosures, and rack enclosures.