Parts List for the Netfinity 5500 M10 Cluster Example

Parts List for the Netfinity 5500 M10 Cluster Example

Quantity	Part Number	Description
2	8661-2RY	Rack-ready model of the Netfinity 5500 M10
2	10L5894	400 MHz, 1 MB Level-2 cache microprocessors (one for each server)
2	01K7263	512 MB SDRAM, ECC RDIMM Memory Kit (one for each server)
2	01K7951	400 Watt Redundant Hot-Swap Power Supply (one for each server)
2	08L2549	IBM 100/10 PCI EtherJet Adapter (one for each server)
2	01K7297	Netfinity Fibre Channel Adapter (one for each server)
6	01K8053	9.10 GB Wide Ultra SCSI SCA-2 (three for each server)
2	Varies (1)	Ethernet cables (to connect the servers to the public network)
1	None (2)	Ethernet Crossover Cable
1	35261RU	Netfinity Fibre Channel RAID Controller
1	35231RU	Netfinity Fibre Channel Hub
2	35202RU	Netfinity EXP15 enclosure
20	01K7959	9.10 GB Wide Ultra SCSI SCA-2 (ten for each enclosure)
2	03K9311	4.2 meter External Ultra2 SCSI Cable (from the RAID controller unit to the EXP15 enclosures)
3	03K9606	5 meter fibre-channel cables (to and from the fibre-channel hub)
1 or more	Varies (3)	Uninterruptible Power Supplies

(1) Must be purchased separately. Part numbers vary.
(2) This cable is provided in the Netfinity Cluster Pack by Vinca. If you are not using the cluster pack, you must  purchase this Category 5 cable from an outside source. The cable must  be designed for point-to-point connections and must  have RJ-45 connectors on each end.
(3) See 'Selecting Servers and Enclosures' for information about the uninterruptible power supply options available for the servers, storage enclosures, and rack enclosures.