Parts List for the Netfinity 5000 Cluster Example
Rack-ready model of the Netfinity 5000
400 MHz, 512 KB Level-2 cache microprocessors (one for each server)
256 MB SDRAM, ECC RDIMM Memory Kit (one for each server)
175 Watt Redundant Power Supply Option (one for each server)
IBM Netfinity ServeRAID-3H Ultra2 SCSI Adapter (one for each server)
IBM Netfinity ServeRAID-3L Ultra2 SCSI Adapter (one for each server)
IBM 100/10 PCI EtherJet Adapter (one for each server)
9.10 GB Wide Ultra SCSI SCA-2 (two for each server)
Third Channel Cable Option (required to route the
ServeRAID II adapter's third channel for external use, such as for the
quorum-arbitration link when using Microsoft Cluster Server)
Ethernet cables (to connect the servers to the public network)
Ethernet Crossover Cable
Netfinity EXP15 enclosure
9.10 GB Wide Ultra SCSI SCA-2 (ten for each enclosure)
4 or 5
4.2 Meter External Ultra2 SCSI Cable (These cables connect
the ServeRAID-3H adapters to the EXP15 enclosures.
One is also required for the quorum-arbitration link when using
Microsoft Cluster Server.)
1 or more
Uninterruptible Power Supplies
(1) Must be purchased separately. Part numbers vary.
(2) This cable is provided in the Netfinity Cluster Pack by Vinca. If you are not using the cluster pack, you must purchase this Category 5 cable from an outside source. The cable must be designed for point-to-point connections and must have RJ-45 connectors on each end.
(3) See 'Selecting Servers and Enclosures' for information about the uninterruptible power supply options available for the servers, storage enclosures, and rack enclosures.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.