Stabilizing Feet
Stabilizing Feet
The four feet attached to the bottom cover rotate 90
degrees to provide additional stability for the server.
Before you place the server in an upright position, rotate
the four feet a quarter turn away from the server.
Then, carefully position the server on its feet.
When you need to access the inside of the server to install
options, you might find it easier to place the server on its
side, so that the system board is facing you. If you do so,
rotate the feet in towards the server, so that they do not
detach due to the weight of the server.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.