Running the diagnostic test programmes

Running the diagnostic test programs


See Diagnostic test programs for a description of the diagnostic programs that come with the server.

  - Attention - Do Do not discard the Enhanced Diagnostics CD. Store it in a safe place for later use.

To start the IBM Enhanced Diagnostics using the CD backup Diagnostic Diskette, do the following:

  1.  Power-off the server and any attached devices.
  2.  Insert the IBM Enhanced Diagnostics backup diskette into diskette drive A.
  3.  Power-on all attached devices, then, power-on the server.
  4.  Follow the instructions on the screen.

To make a backup copy of the IBM Enhanced Diagnostics information on a diskette, do the following:
  1.  Insert a blank, 3.5-inch, formatted 2 MB diskette into diskette drive A.
  2.  Boot the system with the Diagnostics CD in the CD-ROM drive.
  3.  Follow the instructions on the screen.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.