System Board Replacement


System Board Replacement

  - Attention -

  1.  The vital product data (VPD) and latest level of BIOS for the system you  are servicing must be installed on the new system board. To do this, you  must run the Flash Update program using the Flash Update diskette. Obtain  the latest level of BIOS from the BBS/WEB, see Online support  A down level BIOS may cause false error and unnecessary replacement of the  system board.
  2.  The processor and memory modules are separate FRUs. Remove them from the  old system board and install them on the new one.
  3.  Be sure the new system board jumper settings match the  old system board jumper settings.


If replacing the system board doesn't correct the problem, do the following:
  1.  Reinstall the options (processor, etc) on the old  system board and reinstall it in the system.
  2.  Replace the processor.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.