Synchronizing the Adapter Configuration (ServeRAID)

•  EEPROM as Source copies configuration information from the adapter EEPROM to NVRAM and to all hard  disk drives in a Rebuild or Online state that are defined in the adapter EEPROM configuration.
•  NVRAM as Source copies configuration information from NVRAM to the adapter EEPROM and to all hard  disk drives in a Rebuild or Online state that are defined in the adapter NVRAM configuration.
•  NVRAM and POCL as Source updates information from the power-on change list with the information in NVRAM.  This information is then copied to the adapter EEPROM and to all hard disk drives in a Rebuild or Online state that are defined in the NVRAM configuration.
•  Hard Disk Drives as Source retrieves configuration information from hard disk drives. The configuration information is the copied to the adapter  NVRAM and EEPROM.
•  Identified HDD as Source updates the configuration information from hard disk drives. The configuration information with stored configuration information  on a hard disk drive that matches the identifiers stored in the NVRAM. The updated configuration information is then copied to NVRAM, the adapter EEPROM, and the hard disk drives  configured in an array.
•  Specific HDD as Source retrieves the configuration information with stored configuration information on the hard disk drive that you select. The updated configuration information  is then copied to NVRAM, EEPROM, and configured disk drives.