Introduction (ServeRAID)



  Introduction

The IBM PC ServeRAID Adapter is a high performance adapter with 4MB cache memory (default set to write-back mode), that interfaces between the host PCI bus and three independent SCSI buses. The IBM PC ServeRAID Adapter implements redundant array of independent disks (RAID) levels 0, 1 and 5 and can support up to 45 SCSI hard disk drives, with 15 SCSI hard disk drives on each SCSI channel bus.

The ServeRAID adapter supports SCSI-3 Ultra Fast/Wide protocol and can support up to 40MB per second data rate per SCSI bus.

The ServeRAID adapter can be used with several operating systems.


The Device Driver/Administration and Monitoring diskette  contains files that must be installed when you use one of the above operating systems. Be sure to read README file on the Device Driver/Administration and Monitoring diskette  for the appropriate installation instructions for each program.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.