Updating the System BIOS

Updating the System BIOS

Complete this procedure to update the system BIOS.

1.  Insert the IBM Netfinity 5500 M20 BIOS Update  Diskette  in the diskette drive.
2.  Press Ctrl+Alt+Del to restart the server. The system  begins the power-on self-test (POST).
3.  Select 1 - Update POST/BIOS from the menu that  contains various flash (update) options.
4.  Select Y when you are asked if you would like to  move the current POST/BIOS image to the backup ROM location.

     Important:
    The backup image of the current POST/BIOS is helpful with troubleshooting  the upgrade,
    if troubleshooting becomes necessary.

5.  Select N when you are asked if you would like to  save the current code to a diskette.
6.  You will be asked to choose which language you wish to use.
    Select your language (0-7) and press Enter to accept your choice.
7.  Press Enter to start the update process.
8.  Press Enter to confirm that you want to update the system BIOS.
    When the update process completes,  you will be prompted to remove the diskette and press Enter to restart the system.
9.  Remove the diskette and go to Removing the Shuttle and Processor Housing.