Installing Windows NT and the Windows NT Driver


Installing Windows NT and the Windows NT Driver

Perform the following steps to install Windows NT 4.0 on the Fibre Channel drive attached to the QLA2100F adapter.

  1.  Start the Windows NT installation procedure using the Windows NT setup diskettes.
  2.  After the standard devices have been detected and configured, use the S option to Specify Additional Device.
  3.  Select Other; then, press Enter.
  4.  Insert the Netfinity Fibre Channel DOS Device Drivers diskette, then press Enter.
  5.  Select QLogic QLA2100; then, press Enter.
  6.  Continue with the standard installation procedure.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.