Basic and Extended Configuration Status Codes
BCS
ECS
Explanation and Possible Recovery Action
Code
not
in
tableCode
not
in
tableExplanation: The ServeRAID adapter/controller is
not functioning properly.
Action: Replace the adapter or embedded controller
on the system board.
00
01
Explanation: Invalid flash configuration.
Action: Start the IBM ServeRAID Configuration CD
and follow the instructions that appear on the screen.
00
02
Explanation: Invalid NVRAM configuration.
Action: Start the IBM ServeRAID Configuration CD
and follow the instructions that appear on the screen.
00
03
Explanation: Invalid flash and NVRAM configuration.
Action: Start the IBM ServeRAID Configuration CD
and follow the instructions that appear on the screen.
01
08
Explanation: No configuration was found in drives,
or, Online/Rebuild drives are not responding.
Action: Press F4, F5, F7, or F10.
01
18
Explanation: No configuration was found in drives,
or, Online/Rebuild and Hot-Spare/Standby Hot-Spare drives
are not responding.
Action: Press F4, F5, F7, or F10.
01
28
Explanation: No configuration was found in drives, or,
Online/Rebuild and Ready/Standby drives are not responding.
Action: Press F4, F5, F7, or F10.
01
38
Explanation: No configuration was found in drives,
or, Online/Rebuild, Hot-Spare/Standby Hot-Spare,
and Ready/Standby drives are not responding.
Action: Press F4, F5, F7, or F10.
01
48
Explanation: No configuration was found in drives,
or, Online/Rebuild drives are not responding
and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
01
58
Explanation: No configuration was found in drives,
or, Online/Rebuild and Hot-Spare/Standby Hot-Spare drives
are not responding and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
01
68
Explanation: No configuration was found in drives, or,
Online/Rebuild and Ready/Standby drives are not responding
and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
01
78
Explanation: No configuration was found in drives,
or, Online/Rebuild, Hot-Spare/Standby Hot-Spare,
and Ready/Standby drives are not responding
and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
03
88
Explanation: A drive was imported from another system
and it has valid configuration,
and, Online/Rebuild drives are not responding.
Action: Press F4, F5, F7, or F10.
03
98
Explanation:A drive was imported from another system
and it has valid configuration, and, Online/Rebuild
and Hot Spare/Standby Hot-Spare drives are not responding.
Action: Press F4, F5, F7, or F10.
03
A8
Explanation: A drive was imported from another system
and it has valid configuration,
and, Online/Rebuild and Ready/Standby drives
are not responding.
Action: Press F4, F5, F7, or F10.
03
B8
Explanation: A drive was imported from another system
and it has valid configuration,
and, Online/Rebuild, Hot-Spare/Standby Hot-Spare,
and Ready/Standby drives are not responding.
Action: Press F4, F5, F7, or F10.
03
C8
Explanation: A drive was imported from another system
and it has valid configuration,
and, Online/Rebuild drives are not responding
and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
03
D8
Explanation: A drive was imported from another system
and it has valid configuration,
and, Online/Rebuild and Hot-Spare/Standby Hot-Spare drives
are not responding and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
03
E8
Explanation: A drive was imported from another system
and it has valid configuration, and, Online/Rebuild
and Ready/Standby drives are not responding
and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
03
F8
Explanation: A drive was imported from another system
and it has valid configuration,
and, Online/Rebuild, Hot-Spare/Standby Hot-Spare,
and Ready/Standby drives are not responding
and unidentified drives were found.
Action: Press F4, F5, F7, or F10.
07
08
Explanation: Online/Rebuild drives are not responding.
Action: Press F4, F5, or F10.
07
0C
Explanation: Online/Rebuild drives are not responding
and a drive was found at the incorrect SCSI ID.
Action: Press F4, F5, F6, or F10.
07
18
Explanation: Online/Rebuild and Hot-Spare/Standby
Hot-Spare drives are not responding.
Action: Press F4, F5, or F10.
07
1C
Explanation: Online/Rebuild and Hot Spare/Standby
Hot-Spare drives are not responding
and a drive was found at the incorrect SCSI ID.
Action: Press F4, F5, F6, or F10.
07
28
Explanation: Online/Rebuild and Ready/Standby drives
are not responding.
Action: Press F4, F5, or F10.
07
2C
Explanation: Online/Rebuild and Ready/Standby drives
are not responding,
and, a drive was found at the incorrect SCSI ID.
Action: Press F4, F5, F6, or F10.
07
38
Explanation: Online/Rebuild, Ready/Standby,
and Hot-Spare/Standby Hot-Spare drives are not responding.
Action: Press F4, F5, or F10.
07
3C
Explanation: Online/Rebuild, Ready/Standby,
and Hot-Spare/Standby Hot-Spare drives are not responding,
and, a drive was found at the incorrect SCSI ID.
Action: Press F4, F5, F6, or F10.
07
48
Explanation: Online/Rebuild drives are not responding
and unidentified drives were found.
Action: Press F4, F5, or F10.
07
4C
Explanation: Online/Rebuild drives are not responding,
a drive was found at the incorrect SCSI ID,
and unidentified drives were found.
Action: Press F4, F5, F6, or F10.
07
58
Explanation: Online/Rebuild and Hot Spare/Standby
Hot-Spare drives are not responding,
and, unidentified drives were found.
Action: Press F4, F5, or F10.
07
5C
Explanation: Online/Rebuild and Hot Spare/Standby
Hot-Spare drives are not responding,
a drive was found at the incorrect SCSI ID,
and unidentified drives were found.
Action: Press F4, F5, F6, or F10.
07
68
Explanation: Online/Rebuild and Ready/Standby drives
are not responding, and, unidentified drives were found.
Action: Press F4, F5, or F10.
07
6C
Explanation: Online/Rebuild and Ready/Standby
drives are not responding,
a drive was found at the incorrect SCSI ID,
and unidentified drives were found.
Action: Press F4, F5, F6, or F10.
07
78
Explanation: Online/Rebuild, Ready/Standby,
and Hot-Spare/Standby Hot-Spare drives are not responding,
and, unidentified drives were found.
Action: Press F4, F5, or F10.
07
7C
Explanation: Online/Rebuild, Ready/Standby,
and Hot-Spare/Standby Hot-Spare drives are not responding,
a drive was found at the incorrect SCSI ID,
and unidentified drives were found.
Action: Press F4, F5, F6, or F10.
09
00
Explanation: No error occurred.
Action: No action is required.
09
10
Explanation: Hot-Spare/Standby Hot-Spare drives
are not responding.
Action: Press F4, F5, or F10.
09
20
Explanation: Ready/Standby drives are not responding.
Action: Press F4, F5, or F10.
09
30
Explanation: Hot-Spare/Standby Hot-Spare
and Ready/Standby drives are not responding.
Action: Press F4, F5, or F10.
0F
00
Explanation: No error occurred.
Action: No action is required.
0F
10
Explanation: Hot-Spare/Standby Hot-Spare drives
are not responding.
Action: Press F4, F5, or F10.
0F
20
Explanation: Ready/Standby drives are not responding.
Action: Press F4, F5, or F10.
0F
30
Explanation: Hot-Spare/Standby Hot-Spare
and Ready/Standby drives are not responding.
Action: Press F4, F5, or F10.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.