Replacing a non-hot-plug adapter in a failover pair - IBM ServeRAID-3H and ServeRAID-3L Adapters

Replacing a non-hot-plug adapter in a failover pair

If the failed adapter is not in a hot-plug PCI slot, do the following to replace it:

1.  Shutdown the server.
2.  Replace the failed adapter.
3.  Follow the steps to reconfigure a second adapter.
   •  To initialized the adapter, do steps 7 to 9.
   •  To configure the adapter for clustering, do steps 6 to 12.

If the failed adapter is in a hot-plug slot, refer to the documentation that comes with the server for instructions for replacing it.