SCSI LEDs - SCSI Error Codes (Netfinity 7000-M10 - Type 8680)

SCSI LEDs - SCSI Error Codes

SCSI LEDs

Check the status LED. If on, do the following:

1.  Check the internal SCSI cable.
2.  Replace the failing hard disk drive.
3.  Replace the SCSI backplane.
4.  Replace the hard disk drive controller (PCI adapter or I/O Function card).

SCSI Error Codes

Error Code	FRU/Action
All SCSI Errors	1. External SCSI devices must be powered-on before
One or more of the following	you power-on the server.
might be causing the problem:	2. The cables for all external SCSI devices are connected correctly.
° A failing SCSI device	3. If you have attached an external SCSI device to the server,
(adapter, hard drive, controller)	make sure the external SCSI termination is set to automatic.
° An improper SCSI	4. The last device in each SCSI chain is terminated correctly.
configuration or SCSI	5. The SCSI devices are configured correctly.
termination jumper setting
° Duplicate SCSI IDs in
the same SCSI chain
° A missing or improperly
installed SCSI terminator
° A defective SCSI terminator
° An improperly installed cable
° A defective cable