Power Backplane Removal (Netfinity 7000-M10 - Type 8680)


Power Backplane Removal

Before you begin: Read 'Safety Information'

 

To remove the power backplane, do the following:
  1.  Remove the power supplies, see 'Hot-Swap Power Supply Removal'.
  2.  Remove the AC power assembly, see 'AC Power Assembly Removal'.
  3.  Remove the two power supply filler plate(s) screws and remove the filler plate(s).
  4.  Disconnect the power backplane cables.
  5.  Turn the 4 quarter-turn fasteners -1- and remove the power backplane assembly.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.