Performing a Shutdown - EXP200 Type 3530 - 1RU, 1RX

Performing a Shutdown

Note: If the Expansion Unit loses power unexpectedly, it might be due to a hardware failure in the power system or mid-plane
(see 'Symptom-to-FRU Index').

To perform a shutdown:

  1.  Make sure that all I/O activity has stopped.
     If applicable, logically disconnect from the host controller.
  2.  Make sure that all amber Fault LEDs are off.
     If any Fault LEDs are lit (drives, power supplies, or fans), correct the problem before you turn off the power.
  3.  Turn off both power supply switches on the back of the expansion unit.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.