No Beep Symptoms

No Beep Symptoms

No Beep Symptom	FRU/Action
No beep and the system	1. Speaker
operates correctly.	2. System Board
No Beeps occur after	1. Run Configuration/Setup, set the Start Options
successfully completing	Power-On Status to enable
POST	2. Check speaker connection
(The Power-On Status is	3. Speaker
disabled.)	4. System Board
No AC power	1. Check the power cord
(Power supply AC LED is	2. Power Supply (If two are installed, swap
off)	them to determine if one is defective.)
	3. Hot Swap Power AC Inlet Box
No beep and no video	1. See 'Undetermined Problems'
No beep, fans running,	1. If an optional VRM is installed and no
and AC power LED	optional processor, remove the optional VRM
blinking	2. If optional VRM failed, replace optional VRM.
(System held in reset)	3. If primary VRM failed, replace system board.
	4. If system board failed, replace system board.